Dell 61KCY New Bulk Pack
Dell Ready rails larger than 1U can be installed in a rack with threaded holes using adapter brackets from RackSolutions. Photo #1 shows the Ready Rail mounting mechanism used on Dell 11G servers. This mechanism has two large pins that are inserted into an unthreaded square hole or rack. These pins are 1/4" in diameter and will not fit standard racks with threaded holes. The mechanism has two small spring-loaded hooks that lock the rail into the shelf. RackSolutions adapter brackets convert round holes to square holes. To use the brackets, the screws must be installed in a location that does not interfere with the pins or hooks on the Dell Ready rails. There are two holes in the bracket to place the screws that do not interfere with the pins and hooks. Photo #2 shows where the screws are installed and how the pins and hooks are inserted into the adapter bracket. Once the bracket is installed in the rack, the Dell Ready rail can be installed using the normal method. The rail protru...